Bituroll

Bituroll

Fibreglass Reinforced Membrane

Bituroll is a polymer modified bituminous waterproofing membrane, manufactured from a mixture of bitumen and selected polymers, which are blended together to obtain good waterproofing properties. The bitumen compound also exhibits high heat and UV resistance properties. The polymerized bitumen is coated on to a dimensionally stable reinforcement core of non wovwn glass fibre carrier.

Technical Specification

PROPERTIES VALUES TEST STANDARDS
Product P0260, P0360 P0460 S0260, S0360
Thickness, mm 2.0-3.0 4.0 2.0-3.0 DIN EN 1849-1
Mass per unit area, kg/m²
2mm 2.0-2.3 - 2.0-2.3 DIN EN 1849-1
3mm 3.0-3.3 - 3.0-3.3 DIN EN 1849-1
4mm - 4.0-4.3 - DIN EN 1849-1
Reinforcement (fibre glass) g/m² 60 DIN EN 1849-1
Coating asphalt APPAPPSBS
Softening point(R & B), °C 155 155 110 ASTM D36/DIN EN 1427
Penetration @ 25°C, 0.1mm 20-40 ASTM D 5/DIN EN 1426
Tensile strength(l/t). Nl5cm 300/200 400/300 320/200 DIN EN 12311-1
Elongation @ break (l/t),% 3/3 3/3 3/3 DIN EN 12311-1
Tear resistance, N 150/100 200/150 250/150 DIN EN 12310-1
Puncture resistance, N > 250 > 300 > 120 ASTM E 154
Resistance to water pressure @ 5 bar 70 BS EN 12390
Water absorption @24hrs, % < 0.2 ASTM D 5147
Heat resistance @ 80°C No flow DIN EN 52 123
Low temperature flexibility @ 0°C No crackASTM D 5147
Resistance to ageing No deterioation
ASTM G 53
Dimensional stability, % < 0.3DIN EN 1-1107

Products

Modified, torch-on waterproofing membranes with fiberglass, both sides are coated with polyethylene film or one side coated with polyethylene film, the other side is coated with silica sand, aluminum foil or natural or colored slate chippings (mineral stones).
Bituroll P0260

Bituroll P0260

Size : 2mm
Reinforcement : Fiber Glass
Coating Asphalt : APP
Bituroll P0360

Bituroll P0360

Size : 3mm
Reinforcement : Fiber Glass
Coating Asphalt : APP
Bituroll P0460

Bituroll P0460

Size : 4mm
Reinforcement : Fiber Glass
Coating Asphalt : APP
Bituroll S0260

Bituroll S0260

Size : 2mm
Reinforcement : Fiber Glass
Coating Asphalt : SBS
Bituroll S0360

Bituroll S0360

Size : 3mm
Reinforcement : Fiber Glass
Coating Asphalt : SBS

Properties

This material has the ability to retain its shape after being stretched and therefore, is widely used in modified bitumen roofing, coatings, sealants and paving amongst other applications.
Waterproofing

Waterproofing

Excellent resistance to positive water and vapour pressure.

Bituminous Primer

Fiber Glass

More resistance to moisture due to the porosity of the sheets.

Waterproofing Membrane Manufacturers in Sharjah

UV Resistance

Membrane is exposed to the sun, it must be resistant to UV rays.

Best Waterproofing Membrane

Torch Applied

Long life span due to its tightness of membrane against the surface.

SBS membrane

Heat Resistance

High resistance to mechanical damage and puncturing.

Modified Bituminous Membrane

Flexible

Good flexibility. Can accomodate structural movements.

Roof Waterproofing

Rolled

Good dimensional stability under tension.

Waterproofing Membrane Suppliers in Sharjah

Environment Friendly

Developing new and alternative technologies.

Waterproofing Membrane Manufacturers in Dubai

Harmless

Resistant to water borne chemicals.

Area of Appllication

Bituroll is used as waterproofing membrane on the folllowing structures:

Bituroll membranes in tropical regions can also be used for waterproofin of below ground concrete sturcture like:

Packing

BITUROLL : 3mm-1m*10m, #30 kg wt. 4mm-1m*10m, #40kg wt.
Nurprime SB : 20litres pail and 200 litres drum
Nurmastic : 20kg pail